 |
|
|
Maintenance & Construction Sauna Maintenance With very minimal maintenance you can keep your sauna looking great.
The following is a general guide.
STEP 1: Do not paint, varnish or stain the interior portions with any normal paint or varnish. The wood needs to breathe. Also artificial finishes on the wood can create a much hotter surface on the wood, creating the possibility of fumes from the wood treatment, and take away some of the “softness” of the heat and steam penetrating the wood.
STEP 2.0: The simplest method of sauna maintenance is to keep a hand brush near the sauna door. The last person out dips the brush in the water bucket, and does a quick scrubbing on the benches, walls, backrests, etc. This 30-second ritual will keep your sauna looking great indefinitely. This will prevent the need to use anything stronger than clan water on the wood portions.
STEP 2.1: If you do not follow STEP 2 closely, you may consider using our sauna wood cleaning kits, Bacterinol, or paraffin oil treatment kits.
STEP 3: After you are finished using the sauna, and your cleaning process is complete, prop the duckboards off the floor. Leave the sauna door open, to air it out completely. The heat remaining I the rocks and in the wood will dry the sauna completely, and even can dry the shower area down, if it is adjacent to the sauna room.
STEP 4: If you get some dirt or sweat stains developing (if #2 is missed a few times), again use a hand brush but use warm water with a mild detergent in it. To get the benches looking like new, you can lightly sand your benches about once per year. It will whiten them to a “like new” condition. If you should happen to have mold develop anywhere (on duck boards, for example), you can clean with bleach or our Bacterinol sauna cleaner.
STEP 5: Depending on how often you use your sauna, occasionally wet-mop the floor, with a liquid deodorizing cleaner. With these simple maintenance tips your sauna will stay inviting, fresh smelling and enjoyable to be in. |
| | | | | Designing and Building a Sauna Initial starting points for good design and building
Where should you focus your attention when you start designing a sauna?
Various points have an effect on the overall result. Of course, the heart of the sauna is the heater and the right selection heater model and control options can heavily impact your overall enjoyment of the sauna. Sauna temperature and good quality heater stones are also important aspects of consideration when designing a sauna.
Sauna size
should be insulated to a minimum of R12 on the walls and R16 on the ceiling. The sauna itself requires an equally effective heater to maximize size according to UL, CSA or ETL guidelines. Consult your local dealer or Finnleo or Helo brand page for sizing charts.
Inside height
The minimum permitted ceiling height of a sauna is 77”. A typical ceiling height in the sauna is 84”. Check the minimum sauna height in the heater
brochure or installation instructions. A maximum ceiling height as recommended by safety guidelines is 96”.
Benching
Benches in the sauna is a very important step. Maximizing bench space and minimizing wasted floor space adds to the efficiency of your sauna and maximizes the number of users for your space. Typically a sauna should plan for a lower bench and upper bench, with your upper bench area used as the main calculation for how many users you’d like to accommodate. Figure 2’ of bench space as typical for each sauna bather.
Wood options for the benches and walls: Usually the seating boards are built from Abachi, Cedar or Alder wood. Walls are typically covered with Nordic White Spruce, Hemlock, Cedar or European Alder.
Sauna door
An All-glass door is quickly become the world standard as a stylish and durable option. The glass resistable under high-heat and steam and fluctuations of wet and dry.
Heater location
The heater is typically located along the front or side wall to maximize your main wall and additional side wall benching options. Recent innovations with sauna heaters (Tonttu series for example) has allowed for unique bench designs and even designs that allow the benches to wrap around the heater. Your local Finnleo or Helo dealer will be happy to sketch out options with you and will provide professional 2D or 3D CAD drawings of your space showing you heater and bench layout options.
Sauna's ventilation
Air mass that is colder than the surrounding temperature always tries to move downwards. Room-temperature air in the sauna 'sinks' down to the floor of the sauna unless it can be mixed with the air mass circulating inside the sauna. To get the natural draw effect and pull fresh air through the room, it is important to locate your in-vent directly under the heater so that the intense heat of the rocks accompanied with Saunatec’s open air heater design pulls the air into the room. By placing the exhaust vent as close to opposite your heater in-vent as possible your maximize air exchange and the level of the out-vent (typically 2’ off the floor) is low enough you have little heat loss, but high enough you’ll get good air exchange. For those who wish to use mechanical venting, please contact Saunatec’s technical staff or your local dealer for direct options related to your particular install. | | |
| | | Importance of Finnleo/Helo’s Vulkanite heater stones The heater stones of an electrical heater have to fulfill the following requirements: - They have to withstand high temperatures and wide fluctuations of heat.
- They must not create dust nor discharge any odors.
- They have to deliver sufficiently the heat, grab water and in this way prevent the dripping of water. Therefore an uneven surface is better than an even one.
- They have to be sufficiently large in order for the air to circulate well between the stones and for the elements to operate better.
- They must hold heat well. Once the room reaches temperature, a rock that holds the heat well will use less energy to stay hot, yet produce wonderful steam.
- They should be recommended and tested by the heater manufacturer. The Finnleo/Helo Vulkanite stones are tested heater stones containing no harmful VOC’s.
| | | | |
|
|
 |
|
.jpg)
There are many Saunatec options
from Do-It-Yourself packages or
partial kits, portable saunas which
simply plug-and-play, to all
inclusive, turn-key, Designer style
rooms installed by your local dealer. 
The heart of the sauna is the heater
and the right selection of heater model
and control options can heavily
impact our overall enjoyment of the
sauna and the way you use it.
An All-glass door has quickly
become the world standard as a
stylish and durable option. The
glass is stable under high-heat
and steam and fluctuations of wet
and dry extremes. 
Saunatec's Vulkanite rocks are designed to handle dry or wet use and temperature extremes.
|
 |
|
